Surface Pro Devices and eduroam

A knowledge base article about Surface Pro Devices and eduroam provided by the UC Berkeley IT Service Hub - Knowledge Portal

If you are having issues connecting to eduroam using a Surface Pro device it may be necessary to roll back the wifi driver. Follow the instructions below to check the driver version and roll back the driver if necessary.

Note: airbears2 will be decommissioned, all new connections should be to eduroam.

Before you begin

Task to be performed

1. Go to Control Panel>Hardware and Sound, select Device Manager.


2. Expand the Network adapters section. 

3. Right-click Marvell Wireless adapter and select Properties.

4. Click the Driver tab to see which driver version is installed. 

Good driver:  
Driver date: 10/29/2014
Driver Version: 15.68.3066.135
Bad driver:
Driver date: 6/4/2015
Driver Version: 15.68.3091.193 
  1. Download the good driver version and unzip.
  2. Right-click mrvlpcie8897.inf and install.
  3. Open Device Manager, right click on Marvell Wireless adapter and select Update Driver Software.
  4. Select Browse my computer for driver software and then Let me pick from a list of device drivers on my computer.
  5. Navigate to your download location and select version 15.68.3066.135 [10/29/2014] click Next.
  6. Reboot when prompted and reconnect to eduroam.

If you have issues connecting to eduroam or Berkeley-IoT, try rebooting your device and go through these steps again. If this does not resolve connectivity please contact us for help: